CC BY
21
№ 7 (100)
A UNI
1Ш. ТЕ)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2022 г.
DOI: 10.32743/UniTech.2022.100.7.14025 HIGH-PRESSURE COAL DUST PRESSING MACHINE
Nasiba Vokhidova
Doctoral Student, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan E-mail: voxidova. nasiba92@gmail.com
УСТРОЙСТВО ДЛЯ ПРЕССОВАНИЯ УГОЛЬНОЙ ПЫЛИ ПОД ВЫСОКИМ ДАВЛЕНИЕМ
Вохидова Насибахон Хабибулло цизи
докторант,
Ферганский политехнический институт, Республика Узбекистан, г. Фергана
ABSTRACT
The article describes a high-pressure press to make coal dust generated in the natural state of coal mines during mining and transportation in a usable state.
АННОТАЦИЯ
В статье представлен проект пресса высокого давления для преобразования угольной пыли, образующейся в угольных шахтах при выемке и транспортировке, в пригодное для использования состояние.
Keywords: bearings, excavation, transportation, coal powder, pressure, press, piston, cylinder, conical rod, shape, briquette, strength.
Ключевые слова: угольные шахты, добывание, транспортировка, угольный порошок, давления, пресс, поршень, цилиндр, конусный стержень, форма, брикет, прочность.
Today, coal is mined, transported and consumed by consumers' supply of quality fuels and working with coal fuels industries_has become one of the main industries. Coal industry coal mining (in some cases enrichment, briquetting) and delivery to consumers. The most preferred and efficient method of coal mining is open-pit mining. Coal deposits it is located in a pit, it is mined in a closed (mine) method. In the coal industry of Uzbekistan, mainly open methods are used. This method also has its drawbacks. For example, due to the presence of open basins, the moisture content of coal is high and they decompose under the influence of atmospheric heat. This creates fine-grained coal dust in the coal mines. This figure is around 60% [1,2,3,4,5].
The judicious use by consumers of this generated coal dust poses several challenges. For example in loading, transportation and use by consumers [6,7].
To eliminate the existing problems, various methods of pressing are used in the country. Of these, auger, roller and hand pressing devices are used[8,9,10].
The conversion of coal dust to solid fuel is achieved by placing it in a specific vessel under high pressure and adding binders to its composition [11,12,13].
Based on the above students, the department of "Technological machines and equipment" of Fergana Polytechnic Institute conducts research to address these issues [14,15].
The piston press, which presses the coal powder along the horizontal axis, developed by us, was designed and the design was created. This device differs from other presses in that it does not require the addition of additional binders, has high pressure, simple design and has high efficiency [16,17].
This device consists of 3 parts, the first - the driving part, the second - the pressing part, and the third - the forming part of the coal briquette.
Библиографическое описание: Vokhidova N HIGH-PRESSURE COAL DUST PRESSING MACHINE // Universum: технические науки : электрон. научн. журн. 2022. 7(100). URL: https:// 7universum. com/ru/tech/archive/item/14025
№ 7 (100)
A UNI
1Ш. ТЕ)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2022 г.
Figure 1. Technological scheme of the pressing process
Coal powder is brought from coal storage and a fraction of less than 5 mm is sorted. The rest is suitable for
consumption, and the rest is crushed. After that, the selected coal powder is dried at a temperature of 80 - 100 °C and sent to the press by conveyor.
Figure 2. General view of the device
The principle of operation of the device: Initially, electromotor 1 transmits rotational motion through coupling 2 to the reducer 3. The gearbox 3 transmits rotational motion in a 10/1 ratio to the drive 6. The drive disc transmits the motion to shaft 8 via the crankshaft mechanism 7. The rod 8 moves the piston 10 forward and backwards. The product is transferred to press hopper 13, and in the first case of the piston 10, the coal powder is filled into cylinder 11. When the piston 10 moves to the second position, the product drop through the bunker 13 piston 10 is closed and the pressing process starts.
References:
The forming part, which is the third part of the device, is then briquetted due to the volume compaction of the coal powder supplied under high pressure between the conical rods mounted on cylinder 12.
The briquette coming out of the forming part comes out to a certain length and is used in special automatic cutters to cut it to the desired size [22].
In conclusion, it can be said that the created device solves the problems of providing consumers with solid fuels with a high level of durability, flammability and a certain porosity.
1. Akhmedovich K.A. et al. The Diligence of Drying the Coal Dust in the Process of Obtainig the Coal Brickets // International Journal of Innovative Analyses and Emerging Technology. - 2021. - T. 1. - №. 5. - C. 111-115.
2. Axmedovich X.A., Saidakbarovna S.D. Research the strength limit of briquette production //Asian journal of multidimensional research. - 2021. - T. 10. - №. 5. - C. 275-283.
№ 7 (100)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2022 г.
3. Khakimov A.A., Salikhanova D.S., Vokhidova N.K. Calculation and design of a screv press for a fuel briquette // Scientific-technical journal. - 2020. - T. 24. - №. 3. - C. 65-68.
4. Rukhiddinovna N.Y., Akhmedovich K.A. Simulated Additional Computer System-As an Information and New Educational Environment in the Vacuation of Future Specialists //International Journal of Innovative Analyses and Emerging Technology. - 2021. - T. 1. - №. 7. - C. 30-33.
5. Saidakbarovna S.D. et al. The study of the composition and properties of water-oil emulsions formed from local oils and methods for their destruction //European International Journal of Multidisciplinary Research and Management Studies. - 2022. - T. 2. - №. 04. - C. 143-146.
6. Saidakbarovna S.D., Akhmedovich K.A., Abdusattor o'g'li D.A. The current state of technologies for the production and activated clay adsorbents // International Journal of Advance Scientific Research. - 2022. - T. 2. - №. 04. -
7. Saidakbarovna S.D., Akhmedovich K.A., Ziyovutdin o'g'li A.S. The Flotation Methods of Industrial Wastewater Treatment //Eurasian Research Bulletin. - 2022. - Т. 7. - С. 80-85.
8. Xakimov A. et al. Analysis of coal bricket strength dependence on humidity // Барцарорлик ва Етакчи Тадцицотлар онлайн илмий журнали. - 2021. - Т. 1. - №. 5. - С. 79-84.
9. Xakimov A. et al. The diligence of drying coal powder in the process of coal bricket manufacturing //Барцарорлик ва Етакчи Тадцицотлар онлайн илмий журнали. - 2021. - Т. 1. - №. 5. - С. 64-71.
10. Xakimov A., Voxidova N., Rajabov B. Analysis of collection of coal brickets to remove toxic gas //Барцарорлик ва Етакчи Тадцицотлар онлайн илмий журнали. - 2021. - Т. 1. - №. 5. - С. 85-90.
11. Xakimov A., Voxidova N., Xujaxonov Z. Analysis of main indicators of agricultural press in the process of coal powder bricketing //Барцарорлик ва Етакчи Тадцицотлар онлайн илмий журнали. - 2021. - Т. 1. - №. 5. -
12. Вохидова Н.Х. и др. Анализ связующих из местного сырья для брикетированния углольной мелочи //Научно -технический журнал ФерПИ.-2019.-8шепййс4е^ша1 journal (STJ FerPI, ФарПИ ИТЖ, НТЖ ФерПИ, 2019, T. 23, спец. № 3).-C. - С. 69-74.
13. Вохидова Н.Х. Хакимов А.А., Салиханова Д.С., Ахунбаев А.А. Анализ связующих из местного сырья для брикетированния углольной мелочи // Научно-технический журнал ФерПИ. - 2019. - Scientific-technical journal (STJ FerPI, ФарПИ ИТЖ, НТЖ ФерПИ, 2019, T.23, спец. №3). - C. 69-74.
14. Хакимов А.А. и др. Определение показателей качества угольного брикета // Universum: химия и биология. -2021. - №. 5-2 (83). - С. 40-44.
15. Хакимов А.А. и др. Связующее для угольного брикета и влияние его на дисперсный состав //Universum: химия и биология. - 2020. - №. 6 (72). - С. 81-84.
16. Хакимов А.А., Вохидова Н.Х. Использование местных отходов в производстве угольных брикетов //Универсум: химия и биология. - 2020. - №. 4 (70).
17. Хакимов А.А., Вохидова Н.Х., Нажимов Кумир брикети ишлаб чщаришнинг янги технологиясини яратиш // узбекистон республикаси олий ва урта махсус таълим вазирлиги Захириддин Мухаммад Бобур номидаги Андижон давлат университети. - С. 264.
С. 25-28.
С. 72-78.
