Научная статья на тему 'TECHNICAL CO-OPERATION OF THE TECHNICAL REGULATORY AGENCY'

TECHNICAL CO-OPERATION OF THE TECHNICAL REGULATORY AGENCY Текст научной статьи по специальности «Строительство и архитектура»

CC BY
11
3
i Надоели баннеры? Вы всегда можете отключить рекламу.
Ключевые слова
agency / committee / industry / standard / task / problem / solution.

Аннотация научной статьи по строительству и архитектуре, автор научной работы — Yusupov A.R.

solving the problems of metrology, standardization, quality control and quality management requires a revision of existing state and industry standards and other regulatory documents in accordance with international standards, and the creation of new ones. The need to address these issues, in turn, is directly related to Uzbekistan's plans to become a full member of the World Trade Organization.The Technical Committee of the Republic of Uzbekistan for Standardization (TC) operates under the supervision of the Agency for Technical Regulation of Uzbekistan with the participation of republican ministries, state committees and equivalent agencies and departments

i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Текст научной работы на тему «TECHNICAL CO-OPERATION OF THE TECHNICAL REGULATORY AGENCY»

УДК: 004

Yusupov A.R., candidate of technical sciences

associate professor Ferghana Polytechnic Institute Uzbekistan, Ferghana

TECHNICAL CO-OPERATION OF THE TECHNICAL REGULATORY

AGENCY

Abstract: solving the problems of metrology, standardization, quality control and quality management requires a revision of existing state and industry standards and other regulatory documents in accordance with international standards, and the creation of new ones. The need to address these issues, in turn, is directly related to Uzbekistan's plans to become a full member of the World Trade Organization.The Technical Committee of the Republic of Uzbekistan for Standardization (TC) operates under the supervision of the Agency for Technical Regulation of Uzbekistan with the participation of republican ministries, state committees and equivalent agencies and departments

Keywords: agency, committee, industry, standard, task, problem, solution.

Introduction

Among the urgent tasks facing the technical regulation agency in the current market economic conditions are the achievements of Science, the application of new technologies, processes, bringing the quality of products to the level of international standards, ensuring competitiveness and increasing the volume of exports [4,5].

Materials and methods

This includes empirical methods such as modeling, fact, experiment, description and observation, as well as theoretical methods such as logical and historical methods, abstraction, deduction, induction, synthesis and analysis. The research materials are: scientific facts, the results of previous observations, surveys, experiments and tests; means of idealization and rationalization of the scientific approach.

Results and discussion:

Solving the problems of Metrology, standardization, quality control and quality management assumes the consideration of existing state and network standards and other regulatory documents harmonized with international standards, the creation of new ones [6,7,8]. The need to solve these issues is also directly related to Uzbekistan's plans to become a full member of the World Trade Organization [1,2,3,4,5].

Conclusion:

Under the control of the technical regulation agency of Uzbekistan, the technical committee for standardization of the Republic of Uzbekistan

(TQ)carries out foality with the participation of the ministries of the Republic, state committees and their equivalent agencies, Agencies [3]:

1. Communication and informatics

2. Architecture and construction

3. Highways

4. Leather-shoes, fur-making and blacksmithing industries

5. Cereals

6. Medicines and medical equipment

7. Electric energy

8. Electrical engineering

9. Emergency and fire safety

10. Geology search

11. Military and products used for two different purposes

12. Drinking water supply and sewerage

13. Silk industry products

14. Production of consumer and technical ethyl alcohol, alcohol products

15. Physical education and sports

16. Chemical industry

17. Labor protection

18. Management system

19. Alternative fuel and energy

20. Publishing-printing and information-library activities

21. Navurugnazorat

22. Ozneftmahsulot

23. Cotton

24. Testing agricultural techniques and technology

25. Industrial safety

26. Standards Institute

27. Nature conservation

28. Transport

29. Tourism services

30. Continuing education standards

31. Light industrial products

32. Traffic Safety

References:

1. Ozbekiston Respublikasi Prezidentining «Texnik jihatdan tartibga solish, standartlashtirish, sertifikatlashtirish va metrologiya tizimlarini yanada rivojlantirish chora-tadbirlari to'g'risida» 2018 yil 12 dekabrdagi PQ-4059-son Qarori ,

2. Ozbekiston Respublikasi Vazirlar Mahkamasining 2019 yil 24 apreldagi 348-son "Ozbekiston standartlashtirish, metrologiya va sertifikatlashtirish agentligining faoliyatini yanada takomillashtirish chora-tadbirlari to'g'risida" Qarori

3. Ozbekiston Respublikasi Prezidentining 2021 yil 2 iyunb PF-624-sonli "Texnik jihatdan tartibga solish sohasida davlat boshqaruvini tubdan takomillashtirish togrisida" Farmoni, Ozbekiston Respublikasi Prezidentining 2021 yil 2 iyunb PQ 5133-sonli "Ozbekiston Respublikasi Investitsiyalar va tashqi savdo vazirligi huzuridagi O zbekiston texnik jihatdan tartibga solish agentligi faoliyatini tashkil etish chora-tadbirlari to'g'risida" Qarori

4. Tojiyev R.J., Yusupov A.R., Rajabova N.R. Qurilishda metrologiya, standartlash va sertifikatlashtirish [Matn]: darslik / R.J. Tojiyev, A.R. Yusupov, N.R. Rajabova. - Toshkent: «Yosh avlod matbaa», 2022 - 464 b.

5. Tojiyev R.J., Yusupov A.R.. Metrologiya, standartlashtirish va sifat nazorati. Oquv qollanma. Farg'ona.: FarPI,«Texnika» noshirlik bo'limi. 2003-328 bet

6. Сергеев А.Г., Крохин В.В.. Метрология. Учебное пособие. М.: Логос, 2001. -408 с.: ил

7. 1S0 90012. Ulchash vositalarining sifatini ta'minlaydigan talablar.

8. O'z RH 51-095:2000*. Методические указания по составлению карты технического уровня и качества продукции.

i Надоели баннеры? Вы всегда можете отключить рекламу.