CC BY
8
ISSN 1680-9165. №3-4, 2014 r.
MaKflMada MOHOMummi meMip6emoHHaH wacaMsaH KapKacmb^ KWuMbicmaebi canacbi mypaMb KflpaMsaH.
The article considers the problem of the reinforced concrete frames construction quality. The problems of substandard monolithic columns construction, floor axes deflection from the project s design and misalignment are addressed in the article.
UDC 378
A. I. Denchik, A. A. khan, D. A. Iskakova
S. Toraighyrov Pavlodar State University, Pavlodar
THE PROBLEM FOR THE DEVELOPMENT OF EFFECTIVE, EVIDENCE - BASED TEACHING SYSTEM DESIGN AND TECHNOLOGICAL PREPARATION OF FUTURE SPECIALISTS FOR MACHINE BUILDING
The article deals with the problem by developing an effective, evidence-based teaching system design and technological preparation offuture specialists of engineering profile in accordance with the requirements of modern engineering production.
Keywords: engineering, techology, preparation, teaching, labor market, machine building.
In the current transition of the international community to the next level of education, the economy of the Republic of Kazakhstan is on the rise, particularly acute raises the question of training highly skilled, able to work productively in various industries, worthy of competing in the international labor market. In the context of globalization and the deepening of integration processes in the world educational space higher education system should respond promptly to the dynamics of positive change in the world and contribute to the effective staffing for sustainable economic development.
Today in our society, in accordance with modern requirements of science and technology, the introduction of a new classification of professions is an issue about the nature of the training of specialists for machine building, capable of carrying out a qualitative change in their professional activities with the perspective. This is due to more integration in production and in the social sphere of modern information and communication technologies, by decreasing the speed of technological development of production, further deepening of global competition. In an era of rapidly changing market economy specialist field of activity with higher technical education should be broader, less tightly associated with a particular specialty. Modern specialist in Machine building must possess not only a certain level of knowledge, skills and competence, but also constant readiness for self-education and the need for continuing education for the purpose of timely adaptation to changing production conditions, anticipate and assess the social and economic impact of engineering activity and to master computer technology.
We can say that today is practically very little scientific research aimed at improving the design and technological preparation of future specialists for machine building with
НАУКА И ТЕХНИКА КАЗАХСТАНА
the use of information technology, which is an important component of the special training of the future engineer engineering profile.
In today's competitive production is continuously increasing volume and change the content knowledge and skills, which must possess modern experts. In all areas of education being sought ways to intensify and rapid modernization of the system of training using information technology. Creating the conditions for their development, testing and implementation of new search for a reasonable combination with traditional solutions require a whole range of educational, psychological, pedagogical and other problems.
At the same time, the informatization of higher technical education is not directly support and do not always have a direct bearing on the future profession of trained specialists. The success in the application of computer technology depends primarily on how new information technologies can help improve the teaching of traditional, well-to methodically general engineering, general professional and special disciplines. Modern machinery production follows the path of gradual but steady development of computer-aided manufacturing, education, and the key issue then becomes training, are able to solve the problem of production of modern sophisticated equipment with the use of information technology.
There is insufficient elaboration of this problem. Based on this there is a need to develop and implement a comprehensive system of targeted measures, focused on the decision objectively existing contradictions between the increased demands of modern production of the information society to the professional competence of the specialist engineering profile and insufficient level of design and technological preparation.
This contradiction identify the problem: to develop an effective, evidence-based teaching system design and technological preparation of future specialists of engineering profile in accordance with the requirements of modern engineering production.
The object of research - the process of preparing students for machine building at the university.
Subject of research - the formation of engineering and technological knowledge and skills of the students of engineering profile using information technology.
The purpose of research - theoretical basis and practical development of the educational system design and technological preparation of future specialists of engineering profile using information technologies in accordance with the requirements of modern engineering production.
The hypothesis of the study - if training future specialists for machine building will be based on the proposed teaching system design and technological preparation of future specialists for machine building with the use of information technology, it will allow the graduate to reach a new qualitative level, because it ensures their professional competence, mobility, competitiveness in the labor market.
The leading idea of the research: the introduction of pedagogical system design and technological preparation of future specialists of engineering profile using information technologies provide highly trained professional and competent professional, competitive and mobile that meets the requirements of the labor market.
ISSN 1680-9165. №3-4, 2014 г.
Method- ological basis of the research is the theory of knowledge and the provisions of the universal connection of all processes and phenomena in nature and society, the concept of lifelong education, informatization of education system and the theory of vocational education.
Methods: the study and theoretical analysis of scientific, educational, methodological literature on pedagogy, content and technology of vocational training; analysis and generalization of the advanced pedagogical experience; study and analysis of curricula and standards for the training of specialists for machine building; observation, interviews, questionnaires, checklists sessions with their subsequent analysis, the study of the activities of students in the process of design and technological preparation; pedagogical experiment; the use of methods of mathematical statistics in analyzing the results of the pilot study.
Sources of research: contemporary works of philosophers, teachers, psychologists, sociologists, on the issue of professional training; official materials of the Government of the Republic of Kazakhstan and normative documents regulating the educational process in higher education and vocational-technical schools, experimental pedagogical work with students at machine-building enterprises of the region and the practical activities of the author as a university teacher.
Material received on 15.12.14.
А. И. Денчик, А. А. Хан, Д. А. Искакова
Машина жасау ба^дарында болашак мамандарды тшмд1, Fb^biM^ непзделген педагогикалык жYЙесiнщ к^растырымдык-технологиялык дайындау зерттемелер бойынша мэселе
С. Торайгыров атындаFы Павлодар мемлекетлк университет^ Павлодар к.
Материал 15.12.14 баспаFа tyctí.
А. И. Денчик, А. А. Хан, Д. А. Искакова,
Проблема по разработке эффективной, научно-обоснованной педагогической системы конструкторско-технологической подготовки будущих специалистов машиностроительного профиля
Павлодарский государственный университет имени С. Торайгырова, г. Павлодар.
Материал поступил в редакцию 15.12.14.
Мащлада цаз1рг1 машина жасау eHdipici талаптарына сай машина жасау багдарында болашак мамандарды muiMÓí, гылыми-нег1зделген педагогикалык, жуйестщ цурастырымдыц-технологиялъщ дайындау зерттемелер бойынша мэселеа карастырылган.
В статье рассмотрена проблема по разработке эффективной, научно-обоснованной педагогической системы конструкторско-технологической подготовки будущих специалистов машиностроительного профиля в соответствии с требованиями современного машиностроительного производства.
