Научная статья на тему 'Approximate estimation of information damage caused to radio-locating systems by radio-electronic warfare devices'

Approximate estimation of information damage caused to radio-locating systems by radio-electronic warfare devices Текст научной статьи по специальности «Электротехника, электронная техника, информационные технологии»

CC BY
127
34
i Надоели баннеры? Вы всегда можете отключить рекламу.
Ключевые слова
ПОМЕХА / РАДИОЛОКАЦИОННАЯ СИСТЕМА (РЛС) / ЗОНА (ОБЛАСТЬ) / ДАЛЬНОСТЬ / ПОДАВЛЕНИЕ / МОЩНОСТЬ / ПРИЕМНИК (ПРМ)

Аннотация научной статьи по электротехнике, электронной технике, информационным технологиям, автор научной работы — Савашинский Илья Игоревич

В данной работе проведена приближенная оценка информационного ущерба, наносимого радиолокационным системам (РЛС) средствами радиоэлектронной борьбы на основе создания активных помех одной РЛС передатчиком (ПРД) помех автомобиля-нарушителя. Особое внимание уделено определению границ зоны подавления через диаграмму направленности (ДН) РЛС и области неопределенности для одной и нескольких РЛС. Также рассмотрена работа ПРМ при воздействии помех различной интенсивности и приведена формула дальности действия ПРД помех. Получены соответствующие изображения и зависимости.

i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Текст научной работы на тему «Approximate estimation of information damage caused to radio-locating systems by radio-electronic warfare devices»

1. Поиск всех простых чисел в промежутке 2А30 - 2А31-2А32 и подсчет их количеств, сравнение полученных результатов с оценками Чебышева;

2. Поиск среди найденных чисел, равноотстоящие от середины интервала - числа 2А31.

Для решения первой вычислительной задачи поиска простых чисел используется алгоритм Эратосфена, который распараллеливается в технологии CUDA, что на порядок уменьшает время выполнения всей задачи.

Список использованной литературы

1. Боресков А.В., Харламов А.А. Основы работы с технологией CUDA. М.: ДМК Пресс, 2010. 17 с.

2. Берилло А. NVIDIA CUDA - неграфические вычисления на графических процессорах // Информационный ресурс сети интернет IXBT.com, 23.09.2008 г. - http://www.ixbt.com/video3/cuda-1.shtml.

3. Инютин С.А. Компьютерная модулярная алгебра квадратичного диапазона и область ее приложения // Вестник Тюменского государственного университета, 2001, № 2. -С. 14-19.

4. Инютин С.А. Модулярные вычисления в сверхбольших компьютерных диапазонах // Электроника. Известия вузов, 2001, № 6. -С. 81 -87.

Польдяев А.С., 2015

Савашинский Илья Игоревич

УРФУ, ИРИТ-РтФ, каф. РТС, студ. 4 курс г. Екатеринбург, РФ egor37-ilya 14@yandex.ru Бекетова Анна Павловна (научн. руковод.)

УРФУ, каф. ин. языков и перевода ИнФО, ст. препод.

г. Екатеринбург, РФ annishuara@ya.ru

APPROXIMATE ESTIMATION OF INFORMATION DAMAGE CAUSED TO RADIO-LOCATING SYSTEMS BY RADIO-ELECTRONIC WARFARE DEVICES

Аннотация

В данной работе проведена приближенная оценка информационного ущерба, наносимого радиолокационным системам (РЛС) средствами радиоэлектронной борьбы на основе создания активных помех одной РЛС передатчиком (ПРД) помех автомобиля-нарушителя. Особое внимание уделено определению границ зоны подавления через диаграмму направленности (ДН) РЛС и области неопределенности для одной и нескольких РЛС. Также рассмотрена работа ПРМ при воздействии помех различной интенсивности и приведена формула дальности действия ПРД помех. Получены соответствующие изображения и зависимости.

Ключевые слова

Помеха, радиолокационная система (РЛС), зона (область), дальность, подавление, мощность,

приемник (ПРМ).

For noises' efficiency estimation it is necessary to find the relation of noise/signal power ratio (the к coefficient) to noises' station and repressed appliance parameters.

The aim (automobile-offender) will be considered to overcome one radio-locating system (RLS), pic.1.

RLS Aim

Pic.l. Case of active noises creating

Parameters of the system creating noises are the following: Pn - power of noises' transmitter (TST); Gn -maximum of the directivity (D) of the noises' TST's antenna with included feeder's energy conversion efficiency (ECE); Afn - effective noise's spectrum width; y - coefficient of different noises' TST's antenna and repressed RLS polarizations; Oa - effective dispersion area; Ra, da, (pa - polar aim's coordinates. The da, (a angles are measured in appropriate planes from antenna's radiation pattern (ARP) maximum of repressed RLS (pic.2.); Ra - distance to the aim.

Parameters of the repressed appliance are the following: Ps - power of repressed RLS; Gs - maximum of D of repressed RLS (PSG6 is often called as system's energy potential); Afpb - passband's width of repressed RLS's receiver's (RCV's) line part (considering that Afn>Afpb); F(da,^a) - normalized ARP's function of repressed RLS by the field; Ar- antenna's equivalent absorption surface (absorption surface) of repressed RLS defined by the following formula Ar=(GJ.2)/(4n).

As follows from the noise/RCV's input signal power ratio k=(P^Ps)m=((PnGn)/(PsGs))10°'1^ay(Afpb/Af,)((4nRa2)/aa) (frm.1),

where a is a coefficient of atmosphere attenuation (dB/km) while only one-side signal passing, the k coefficient and the repression area's limit are defined by repressed RLS's ARP. If the noises' TST works on the ARP's main lobe, the repression area will have a longer distance than in case of side lobe working.

In pic. 3 repression area's coordinates of RLS with the defined ARP are shown in the polar coordinate system.

Repression area (noise is efficient)

Pic.3. Repression area of RLS by noises' RCV in the polar coordinate system

In pic. 3 it can be seen that with the defined noises' station energy potential the aim can closer approach to RLS without detection while ARP's main lobe working than in case of side lobe working. In other words, the detection distance in the first case (C1) will be shorter than in the second case (C2) (Ra min1<Ra mi«2); but in both of the cases detection distances are shorter than the RLS's timesheet detection distance (R a min1 <Ra min2<RRLS max).

Noises' station energy potential increasing leads to the displacement of the repression area's limit to RLS.

In practical calculations of the repression area's limit finding it is important to know the side lobes' level relation to the ARP's main lobes' level. The side lobes' level and their thin structure relate to RLS's individual characteristics and depend on the antenna's position. For approximate calculations, one can get approximate levels of the first and second side lobes on 20 and 30 dB lower than the main lobe's level accordingly [1].

If the electromagnetic wave's (EMW) absorption (a=0) from frm.1 is ignored, one can find the minimum repression distance's formula in case of k=kr (where kr is a repression coefficient of the defined radio-electronic (RE) appliance with the defined noise type):

Ra mln=<(kr((PsGs)/(PnGn))(l/y)(Afri/AfIb)(Gc/(4n)) frm.2).

Sometimes frm.2 is called as the noises' TST's working distance formula.

While the noises' TST approaches RLS, the noises' efficiency decreases, (noise/signal ratio decreases). It can be explained by the fact that as the aim with the noises' TST approaches RLS the power of signal reflected from the aim is increases faster than the power of RLS's RCV's input noise. In fact, the power of signal reflected from the aim is proportional to Ra-4 and the power of noise is proportional to Ra-2.

The above given frm.1 and frm.2 are right for the RCV not overloaded by noise. Real RCVs and indication devices have a limited dynamic range. Thus, some Pn max value of the noise's power with the RCV's overloading exists which results in TST losing the ability to fulfill its functions of coming information recognition. In pic. 4 two cases of signal and noise mixture amplification can be seen. Case a is a case of such Pn value of the noise's power at which the RCV is not overloaded. The signal is clearly detected on noises' background. Case b is a case of RCV's overloading by noises of high intensity. Although the signal's power is much bigger than the noise's power, the signal is not detected on RCV's output.

tf

Pic.4 RCV's overloading by noises of high intensity: un - noise's voltage: iu - signal's voltage: a - case of RCV's not overloading; b - case of RCV's overloading

Pic.5 shows the relations of absolute signal's and noise's power (Ps and Pn) values and their ratio of k from the Ra distance. The kr value and the maximum power Pn max of RCV's overloading are put on the x-axis. Relations of

pic.5 are matched to the case of RCV's overloading at the noise's power value Pn max that is bigger than the power required for repression with the defined repression coefficient kr.

Therefore, in the distances range from Rmin to Rmax the RCV will not be repressed, but starting from Ramax to zero distances it will be repressed again with the help of receiving-indication device's overloading. Sometimes in the case of Ramax>Rmin the efficiency of noises in close distances will be higher than in long distances.

Different measures of intensive noises' action decreasing (limitation, instantaneous automatic gain control (AGC), etc. [2]) are taken in RLS today. In this connection, finding the minimum repression distance Ra min is not to rely on RLS's RCV's overloading effect.

The term "repression area" refers to one RLS. It is introduced for active noises' action estimation in statics. In fact, during RLS's overcoming the information about the aim's coordinates is transmitted to control centers from several RLSs situated in different places. Such information about the aim is processed in control centers and the data from one RLS is added and clarified with the help of the data received from other RLSs. Therefore, the area of noises' action (the area of noises' cover) does not correspond to the repression area in dynamics.

For example, if the information about the aim's coordinates comes from two RLSs (pic. 6), after their matching (processing) one can find the aim's position with higher accuracy than in case of one RLS (with two RLSs the base method of distance's measurement can be applied).

Repression areas exist for each of two RLSs and are defined by the squares of Si and S2 sectors. Matching of these areas allows not only solving the distance's measurement problem but also significantly increasing the RLS's resolution ability in noise conditions.

The accuracy of the aim's position finding depends on the squares of Si and S2 sectors as well as on the delay value of different RLSs' information coming. During data processing received from two RLSs the accuracy of the aim's position finding will increase but still will be less than in case without noises. Thus, noises cause the formation of area Su around the aim that is called the uncertainty area. The size of this area defines RLS's resolution ability and its accuracy in noise conditions.

It is obvious that the relation Su<Si,S2,... Sn is right for several RLSs. In case of one RLS the uncertainty area Su corresponds to the repression area S: Su=S.

The sizes of the uncertainty areas can be approximately found from frm.1 and frm.2 and from pic.3 and pic.5. With the defined sizes of uncertainty areas and the defined character of their changing over time some problems of radio-opposition can be solved such as minimum repression distance's finding, route's safe parts finding in an RLS's action area, calculation of radio-opposition devices required for the defined RLS's repression. Список использованной литературы.

1. Вспомогательный источник для адаптированного перевода. Сколник М. Справочник по радиолокации: в 4 т. М.: Сов. радио, 1976.

2. Вспомогательный источник для адаптированного перевода. Куприянов А. И., Сахаров А. В. Радиоэлектронные системы в информационном конфликте. М.: Вузовская книга, 2003.

3. Основной источник для адаптированного перевода. Радиоэлектронная борьба. Основы теории / А. И. Куприянов, Л. Н. Шустов. М.: Вузовская книга, 2011. - 800 с.: ил.

© Савашинский И.И., Бекетова А.П., 2015

УДК - 004-993-13058

Тарасов Валерий Васильевич

Д.х.н., профессор РХТУ им. Менделеева Д.И.

г. Москва, Российская Федерация valery.tarasof@yandex.ru

ОЩУЩЕНИЕ «ТОРМОЖЕНИЯ" И «ОСВОБОЖДЕНИЯ» НОГИ, СТРАДАЮЩЕЙ

ХРОНИЧЕСКИМ ПАРЕЗОМ

Аннотация

Действие «торможения» вызывает ощущение, будто в физическом опыте с маятником, мы попадаем в магнитное поле, и маятник резко затормаживается, как бы врезается в кусок маргарина. Действие «освобождения, отпуска» проявляется в облегчение всего организма. Проведено значительное количество разнообразных опытов, но наиболее интересен опыт по длительному переносу ощущения. Прибор, настроенный на максимальное торможение был перенесен в пространстве на 100 метров сложного пути, ничуть не потеряв своего тормозного потенциала. Но, ещё поразительней, герметичная система, настроенная на счет. По нашему мнению, счёт обусловлен образованием чрезвычайно устойчивых нано пузырьков, располагающихся между твёрдыми поверхностями винтового замка.

Ключевые слова

«Торможение», «освобождение», «отпуск», счёт, построение диаграмм, отражение, электризация, «святая»

вода.

1. Введение.

Особенность действия моего колена - существование двух фаз - «торможения и освобождения» и, порой мне кажется, что я построен из мяса и железа. Похоже, что и наше будущее состоит из смеси неорганического и органического веществ, назовем это будущее - биокомпьютер. Здесь я значительно продвинулся к аппарату обсуждаемого типа благодаря существенному увечью, заставляющему меня вот уже 10 лет ползать, как таракан, по стенке. Если я найду напарника (а я мечтаю об этом!), то Он должен будет некоторое время работать с калекой.

Именно поэтому я, опубликовав 10 статей, не раскрыв ничего. Вот и сейчас я готовлю статью в слабой надежде на успех. Я думаю, что сначала не более 10% времени придётся проводить вместе, а потом всё сведется вообще к минимуму и компьютерным письмам. Итак, надо бы познакомиться!

i Надоели баннеры? Вы всегда можете отключить рекламу.