CC BY
21
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
DOI: 10.32743/UniTech.2021.88.7.12056
STUDYING THE INFRARED SPECTRUM OF REACTION OF MONOETHANOLAMINE
WITH FORMALDIGID
Lochinbek Khurramov
PhD, Tashkent chemical-technological institute, Uzbekistan, Tashkent city E-mail: [email protected]
Akhmadali Khudoyberdiev
PhD, Tashkent chemical-technological institute,
Uzbekistan, Tashkent E-mail: axmadali.xudoyberdiyev. [email protected]
Ravshan Adilov
cand. tech. sci., doc., chief of the department, Technology of high molecular compounds and plastics, Tashkent chemical-technological institute, Uzbekistan, Tashkent E-mail: [email protected]
Muzaffar Alimukhamedov
d.t. s. prof "Technology of high molecular compounds and plastics", Tashkent chemical-technological institute, Uzbekistan, Tashkent region, Tashkent city.
E-mail: [email protected]
Nozima Alimukhamedova (Irmatova)
Bachelor the 4th-course Tashkent chemical-technological institute, Uzbekistan, Tashkent region, Tashkent city.
E-mail: nozima9388@mail. ru
ИЗУЧЕНИЕ ИНФРАКРАСНОГО СПЕКТРА РЕАКЦИИ МОНОЭТАНОЛАМИНА
С ФОРМАЛЬДЕГИДОМ
Хуррамов Лочинбек Маликович
PhD, Ташкентский химико-технологический институт,
Узбекистан, г. Ташкент
Худойбердиев Ахмадали Итолмасович
PhD, Ташкентский химико-технологический институт,
Узбекистан, г. Ташкент
Адилов Равшан Иркинович
канд. техн. наук, доцент, заведующий кафедрой «Технология высокомолекулярных соединений и пластиков» Ташкентского химико-технологического института,
Узбекистан, г. Ташкент.
Алимухамедов Музафар Ганиевич
д-р техн. наук, проф, «Технология высокомолекулярных соединений и пластиков»,
Ташкентский химико-технологический институт,
Узбекистан, г. Ташкент
Алимухамедова (Ирматова ) Нозима Музаффар кизи
студент, Ташкентский химико-технологический институт,
Узбекистан, г. Ташкент
Библиографическое описание: Studying the infrared spectrum of reaction of monoethanolamine with formaldigid // Universum: технические науки : электрон. научн. журн. Khurramov L. [и др.]. 2021. 7(88). URL: https://7univer-sum. com/ru/tech/archive/item/12056
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
ABSTRACT
Today, as a result of the discovery of new deposits of natural gas and the increase in the number of products obtained from the processing of natural gas, it is necessary to improve the cleaning processes. At the same time, an urgent task is the search for and introduction into the gas treatment processes of new highly efficient accessible and cheap alkanolamine chemisorbents and the development of the technology for their application.
АННОТАЦИЯ
Сегодня в результате открытия новых месторождений природного газа и увеличения количества продуктов, получаемых при переработке природного газа, необходимо совершенствовать процессы очистки. В то же время актуальной задачей является поиск и внедрение в процессы очистки газов новых высокоэффективных доступных и дешевых хемосорбентов алканоламинов и разработка технологии их применения.
Keywords: carbon disulfide, carbon disulfide, mercaptans, sulfides, diethanolamine, methyldiethanolamine, di-glycolamine, monoethanolamine, triazine, oxazolidine.
Ключевые слова: сероуглерод, сероуглерод, меркаптаны, сульфиды, диэтаноламин, метилдиэтаноламин, дигликоламин, моноэтаноламин, триазин, оксазолидин.
Introduction: Among the sulfur-containing impurities, hydrogen sulfide (H2S), carbon disulfide (COS), carbon disulfide (CS2) mercaptans (CnH2n-i-SH) are most often present, and sulfides (R-S-R) and disulfides (R-S-S-R) are also present in the gas condensate. Currently, there are several methods of purification of natural gas from acidic impurities that exist and are used on a large scale [1].
DEA-process of gas purification has become widely used in recent years. In particular, this process is used to purify gases containing COS and CS2, as it forms compounds with them that are easily hydrolyzed at elevated temperatures with the release of H2S and CO2.
There are two types of DEA-process - the usual DEA-process (concentration of DEA in solution 20-25%, absorption capacity 0.6-0.8 mol / mol) and DEA
SNPA-process (concentration of DEA in solution 25 - 35%, absorption capacity 1.0 - 1.3 mol / mol). The first is usually used at a partial pressure of acid gas in a crude hydrocarbon gas of the order of 0.2 MPa and higher, the second - at a partial pressure above 0.4 MPa [2].
The rate of absorption of CO2 in an aqueous solution of diethanolamine (DEA) was measured using the Lewis element to determine the kinetic parameters of CO2 - DEA. The absorption rate was controlled by mass transfer from the gas side, which was achieved by controlling the total pressure inside the element. Based on measurements of H2S absorption in water the DEA solution deduced the mass transfer coefficient from the gas side. The kinetic rate constant of the zwitterion formation reaction is in good agreement with the existing literature values. Measurements of the rate of absorption of H2S in aq. a DEA solution, into which CO2 was previously introduced, showed a competition between the absorption of H2S and the desorption of CO2. The model of the rate of mass transfer, which takes into account the influence of a chemical reaction, makes it possible to simulate these opposite processes of mass transfer [3] Ethanolamine purification does not allow purifying the gas to a hydrogen sulfide content of less than 0.5%. Apart from MEA, other amines are also widely used as chemisorbents for purification from acidic components. Diethanolamine (DEA), methyldiethanolamine (MDEA), diglycolamine (DHA) and diisopropanolamine (DIPA) are also selective absorbents for hydrogen sulfide. The first three absorbents are more resistant to the action of COS,
CS2 and CO2, and are less subject to entrainment. The disadvantages are lower reactivity and absorption capacity. DIPA provides fine gas purification and, despite its high cost, has become widespread abroad for the purification of gases from hydrogen sulfide [4]. Hexohydrotriazines are very effective absorbers widely used abroad [5]. So, for the purification of oil and gas from acid gases, for example, Triasorb, Additol, RF, Kerofin (BASF AG, Germany) are widely used [6, 7]. It should be noted that in the Republic of Uzbekistan until today, mono-, di-, methyldiethanola-mines are used as absorbers of hydrogen sulfide and other sulfur-containing compounds, and hexahydrotriazines widely used in Russia, Europe and the United States, which effectively work to absorb sulfur-containing compounds, are not imported at all. In light of the above, the aim of this work was to study the conditions for the formation of N, N', N" tris (p-hydroxyethyl) hexahydro-S-triazine [8].
Experimental part
For the synthesis of hydroxylase-containing compounds, monoethanolamine was used according to TU 602-915-74, grade one, the content of the main substance was not less than 99%. Monoethanolamine was vacuum purified by distillation at 343K / 1.6 kPa. The purified product had = 1.4539. Formaldehyde was used in the form of an aqueous solution - formalin according to GOST 1625, according to which the content of the basic substance is 37.0 ± 0.5%, the density is 1092 kg / m3, methanol is up to 8%. An installation is assembled, consisting of a four-necked flask, a stirrer, a capillary for supplying an inert gas, a separating funnel, an electric stove for heating and a water bath. A certain amount of formaldehyde is poured into the flask in the form of formalin. Monoethanolamine is poured into a separatory funnel. Turn on the stirrer and start dosing of monoethanolamine. At the end of the addition of mo-noethanolamine, the color of the reaction mixture turns light yellow. Then turn on the heating and the reaction mass is heat treated at a temperature of 50°C for 30 minutes. In the course of heat treatment, the color of the reaction mixture changes from light yellow to dark cherry, the viscosity increases [9, 10]. The finished product is purified by vacuum distillation. The distilled N, N ', N"- tris (p-hydroxyethyl) hexahydro-S-triazine after cooling to a temperature of (20-25)°C has a viscosity of 1175 mPa ■ s, = 1.5180, a
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
density of 1175.8 kg / m3 ... The technical product was obtained after distillation of water. The technical product is a dark cherry-colored viscous liquid.
IR spectra of the starting and synthesized compounds were recorded on an IR Fourier spectrometer IRTracer-100. Samples in the form of a thin film were obtained by applying or spraying a liquid or powder of the test substance onto the surface of a prism [11].
The structure of the synthesized compounds was studied by the IR spectroscopic method. The IR spectra of MEoLA (Fig. 1 b) have a broad absorption band at 3500-3150 cm-1 of primary amine and hydroxyl groups, CH2 groups associated with nitrogen and oxygen atoms at 2943 and 2872 cm-1, bending vibrations of primary NH - and CH2-groups at 1573cm-1 and 1482cm-1, skeletal vibrations of OH at 1360 and 1318 cm-1 and C-N at 1360, 1164, 1030 cm-1, stretching vibrations of C-O in CH2OH at 1050-1085cm- 1, a broad absorption band at 712 cm - 1 of NH2 bending vibrations [12]. In accordance with GOST 1625, technical formalin contains up to 8% methanol. Therefore, in its IR spectra (Fig.1a) there are absorption bands of associated hydroxyl groups at 3200-3400, 1020 cm-1, valence CH3 at 2985 cm-1, CH2 groups at 2915 cm-1, C=O at 1644
cm-1, deformation methyl, methylene groups at 1433 cm-1, C-O- at 1103, 980 cm-1.
In the IR spectra of TOEGT synthesized at a molar ratio of MEolA: FD = 1: 1 (Fig.1c), absorption bands characteristic of primary amine (3530-3200, 1318.963.711cm-1), carbonyl (1644cm-1) groups disappear , new absorption bands appeared at 1653 cm-1. The absorption bands of hydroxyl groups did not undergo significant changes. This, apparently, indicates the occurrence of the reaction between the amine and carbonyl groups and the formation of a heterocyclic compound at the final stage of the process. The predominant formation of N, N', N'' -tris- (p -hydroxy-ethyl) hexahydro-S-triazine under our chosen conditions is indicated by the appearance of absorption bands of primary associated hydroxyl groups at 3200-3400 cm-1, 1005 cm-1, methylene groups at 2850-2950 cm-1, - CH2 - N - bonds in the cycle at 1646 cm-1 [13, 14].
The IR spectra (Fig. 2) of the reaction product of MEolA and FD synthesized at a molar ratio of 1: 2 lack an absorption band characteristic of hydroxyl groups at 3200 -3400 cm-1, there are absorption bands characteristic of ox-azolidines at 1183, 1098, 934, 825 cm-1 [15], methylene groups in the cycle at 1456, 1356, 1034, 866 cm-1.
Figure 1. IR spectra of formalin (37% solution) (a), N, N N tris- (0-hydroxyethyl) -hexahydro-S-triazine (b). These data indicate that the synthesized product is methylene bis-oxazolidine
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
Figure 2. IR spectrum of the reaction product MEolA: FD = 1:2 mol / mol thin film
Similar to this product in the IR spectra (Fig. 3) of the compound synthesized at a molar ratio of 1: 4 there is no absorption band of hydroxyl groups at 3200 - 3200 cm-1 and there are absorption bands characteristic of the oxazol-idine cycle.
The data presented allow us to conclude that the products of the MEolA: FD reaction synthesized at a molar ratio of 1: 1 are N, N ', N "-tris- (p-hydroxyethyl) -hexahydro-S-triazine. An increase in the amount of FD taken for synthesis to 2 and higher already leads to the formation of N, N-methylene-bis-oxazolidine [16].
The data presented show that the direction of the reaction of MEolA with FD is mainly determined by the molar ratio of the starting amino alcohol and aldehyde. In this case, by varying the molar ratio, one can obtain sym-hexa-hydrotriazine or a bicyclic product - methylene-bis-oxazol-idine. Taking into account the literature data [17], the following reaction scheme for MEolA and formaldehyde can be proposed:
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
о
HO - CH - CH - NH, + H - C - H:
H
HO - CH - CH - N - C - H
CH2O
OH Hr
OH N- C--« N OH
/ / x \ H H
H^—jC^ H H
/VOH HH
H HO
= ^O-CH2-CH2-N=CH2
I
CH2-CH2-OH
CH2 CH2 HO-CH2-CH2-N N CH2-CH2-OH
cH2
Thus, as a result of the carried out studies of IR and PMR spectroscopy, the structures of the synthesized products of the reaction of monoethanolamine with formaldehyde have been established. It has been shown that the reaction product synthesized at a molar ratio of MEolA: FD
= 1: 1 is N, N ', N "-tris- (ß-hydroxyethyl) -hexahydro-S-triazine (I), an increase in the amount of formaldehyde to 2 and higher results in to the formation of N, N-methylene-bis-oxazolidine (II):
Conclusions:
1. Conducted systematic complex studies on the synthesis of hydroxylase-containing monomeric and oligo-meric compounds. Their physical and chemical properties have been studied.
2. The regularities of CO2 chemisorption by synthesized hydroxylase-containing compounds have been studied. The influence of their structure, nature and concentration of the working solution on the indicators of carbon dioxide chemisorption has been established.
References:
1. NPO Polymersintez. (1988). Foamed plastics., 40.
2. P.P., ., C.S.-M., ., L.Y.-R., & W.-S, A. (2015). Microporous covalent triazine polymers: Efficient Friedel-Crafts synthesis and adsorption / storage of CO [2] and CH [ four] . Mater. Chem., 456.
3. Abdelrehim, E.-S. (2011). Synthesis triazine. Department of Chemistry, 45.
4. Arifdjanov O. Yu., N.S. (2009). Comparison of chemical properties and structure of amines, triazines and nitrogen-containing water-soluble polymer. Chem. and chem. technol, 51-58.
5. D, R. (2002). The polyurethanes book. AQSH: John Wiley and Sons LTD / D. Randall, S. Lee.
6. document, S.p. (2006). USA Патент № C 07 D 251/24 (2006.01)% c 08 f 2/46 (2006.01).
7. Jalilov, Abdulakhat Turapovich; Kiyomov, Sharifjon Nozimovich; and Kiyomova, Nigina Nozimovna (2020) "Adhesion of epoxyurethane reactoplasts," Scientific Bulletin of Namangan State University: Vol. 2 : Iss. 5 , Article 11.
8. FoizRami, A.-M.J. (2009). Mathematical modeling of the proportion of simultaneous absorption of CO2 and H2S using MEA in devices with a hollow fiber membrane. Membr.Sci., 114.
9. G.I. Deryabina, G.K. (1998-2019). Organic Chemistry. В G.K. G.I. Deryabina, Organic Chemistry. Web-textbook.
10. Jalilov, Abdulakhat Turapovich; Tillayev, Abduhafiz Toshevich; and Kiyomov, Sharifjon Nozimovich (2020) "Materials for friction units based on urethan-epoxy bicomponent systems," Scientific Bulletin of Namangan State University: Vol. 2 : Iss. 7 , Article 7.
11. Khudoiberdiev A.I., K.G. (2019). The structure of aldehydes on the direction of their reaction with monoethanolamine. Journal of Chemistry and Chemical Technology, 22-29.
№ 7 (88)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июль, 2021 г.
12. Khurramov L.M., A.N. (2020). Study of the component composition of the reaction mixture containing formaldehyde reaction products . Journal of Chemistry and Chemical Technology, 42-47.
13. Lavrov N.A., Kiyomov S.N., Kryzhanovsky V.K. Properties of filled epoxy polymers //Plasticheskie massy. - 2019. - №.
14. Khurramov L.M., K.A. (2019). nvestigation of the regularities of the formation of triazine compounds used in the process of purifying natural gases from acidic impurities. Materials of the conference "Energy-saving resources, environmentally friendly composite and non-composite materials" (стр. Uzbekistan). Tashkent: TKTI.
15. L. Eckstein, P.G. (1962). On the contribution if hexahydro-s-triazines in the synthesis mechanism of 5-nitroretrahydro-1,3-oxazine derivatives ,. Polanaise dessciences, Poland.
16. LA Kazitsyna, N.K. (1979). Application of uv-, ir-, nmr mass spectroscopy of organic chemistry. moscow: moscow university publishing .
17. Nishikubo Tadatomi, K.A. (2000). A novel polyaddition of bis (epoxide) s with triazine diaryl ether for the synthesis of poly (ether) s containing triazine group in the main chain. Eng: J. Polym. Sci, 329.
1-2. - С. 37-39.
