Научная статья на тему '冲裁件–支撑片冲压模具设计'

冲裁件–支撑片冲压模具设计 Текст научной статьи по специальности «Строительство и архитектура»

CC BY
11
5
i Надоели баннеры? Вы всегда можете отключить рекламу.
Ключевые слова
支撑片 / 冲压工艺 / 模具设计 / 凹凸模 / Supporting piece / Stamping process / Die design / Convex and concave molds

Аннотация научной статьи по строительству и архитектуре, автор научной работы — Wang Yankun

本文基于设计的支撑片图纸, 分析该零件的形状, 尺寸等几何特性, 并结合所要求的精度, 表面质量和材料利用率等冲压工艺性特征. 采用及进模进行设 计, 上模出物, 下模出废料. 模具的上模使用橡胶材料起到整定作用, 提高零件质量的同时减少工序. 凸模是在加工成型, 线切割的基础上把冲裁部分进行螺钉固定, 最后导柱的安装方法是中间导柱的圆形安装并要根据冲压压力选择固定台开式压力机, 目的是防止因安装不正确而损坏模具. 本文对支撑片的研究中对模具的结构设计和材料选择进行了细致探讨, 为今后类似产品的开发积累了宝贵经验.

i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Stamping parts-support piece stamping mold design

This paper is based on the drawing of the designed support piece, analyzes the geometric characteristics of the part such as shape and size, and combines the required precision, surface quality and material utilization and other stamping process characteristics. The design is carried out by adopting and advancing mold, the upper mold produces the object, and the lower mold produces the waste material. The upper die of the mold uses rubber material to play the role of rectification, improving the quality of the parts and reducing the process at the same time. Convex die is processed in the molding, wire cutting based on the blanking part of the screw fixing, and finally the installation method of the guide column is the middle guide column of the circular installation and to be selected according to the stamping pressure of the fixed table open press, the purpose is to prevent damage to the mold due to incorrect installation. In this paper, the study of the support piece of the structural design of the mold and the choice of materials are discussed in detail, and valuable experience has been accumulated for the development of similar products in the future.

Текст научной работы на тему «冲裁件–支撑片冲压模具设计»

For citation-. Wang Yankun. Stamping parts-support piece stamping mold design // Grand Altai Research & Education — Issue 2 (22)'2024 (DOI: 10.25712/ASTU.2410-485X.2024.02) — EDN. https.//elibrary.ru/HUUVMV

UDK 666.1.037.28

Stamping parts-support piece stamping mold design

Wang Yankun1

1 Wuhan Textile University, Hubei Key Laboratory of Digital Textile Equipment, College of Mechanical Engineering and Automation, Wuhan 430073, China E-mail: [email protected]

Abstract. This paper is based on the drawing of the designed support piece, analyzes the geometric characteristics of the part such as shape and size, and combines the required precision, surface quality and material utilization and other stamping process characteristics. The design is carried out by adopting and advancing mold, the upper mold produces the object, and the lower mold produces the waste material. The upper die of the mold uses rubber material to play the role of rectification, improving the quality of the parts and reducing the process at the same time. Convex die is processed in the molding, wire cutting based on the blanking part of the screw fixing, and finally the installation method of the guide column is the middle guide column of the circular installation and to be selected according to the stamping pressure of the fixed table open press, the purpose is to prevent damage to the mold due to incorrect installation. In this paper, the study of the support piece of the structural design of the mold and the choice of materials are discussed in detail, and valuable experience has been accumulated for the development of similar products in the future.

Keywords: Supporting piece; Stamping process; Die design; Convex and concave molds

i nummx^, ^wi^g^m nu, 430073

E-mail. [email protected]

if, TM&fcn.

тжтя,

trn.

ШП: ШШИ; ИйШ

0

шшш. ^ШПХД^Х^«, г&шш, ш&, хш

^МХ^ФЙШМ^Ш [1], ШШШШ, W, йШй^^ШйШД

[2]. »ш«,

щ [3]. шь, ш^шдшш^

ft, Q235, Й^ЁМ

тжш^шшш, хшташ яяж.

Figure 1. Plan view of support plate Figure 2. Arrangement diagram

3

^Ш, йШДШШ, ШШШДЙ

[4]. а

йШпйШй, Щ

Ш3 ^Ж.

Шэ ИШШ

Figure 3. Diagram of concave mold

УШ^аХЁШДт ШД^аШМФ, йШШМ^ЙИШМШ^

шш, ^шш^х^ш,

ДФЙШШШЁ^.

«щшшшшдшштеш, штшш, шмтшшяет, ^

4.

1) 2) AM^tt; 3) 4) mm; 5) rtA^ffi^fiT; 6) Wfe;

7) M^; 8) №; 9) 10) 11) * 12) 13)

14) ^Mam; 15) HA^ltS AM; 16) BM; 17) rtA^tt^fiT; 18) BM;

19) ?t?Lfim; 20) BM; 21) AM

Figure 4. General Assembly Diagram; 1) Lower mold seat; 2) A-type guide pillar; 3) Hexagon socket head cap screw; 4) Concave mold; 5) Hexagon socket flat countersunk head cap screw; 6) guide plate; 7) unloading plate; 8) rubber; 9) cylindrical head unloading screw; 10) convex mold fixing plate; 11) pad plate; 12) Upper die holder; 13) Guide bushings; 14) Drop-in die; 15) Press-in die shank A type; 16) Cylindrical pin B type; 17) Hexagon socket head cap screws; 18) Cylindrical pin type B; 19) Punching die; 20) Cylindrical pin type B; 21) Fixed Retaining Pins Type A

Meerkamm

ШШЖ [5]. Ш, 20 Ш, ШйШШШ

Я. ФЖ^Ш, ШШ^Ш'ЯШ^йШт

ЛШД. ШШМ^&Ж^ 40 «

шйшШЙ.

Figure 5. General assembly drawing 2

5

ft.

mm**, m^t^m

[1] i^, m^i£i+[J]. 2020,

45 (5):176-179

[2] MMl ^M^PX (7^PX), 2023(2):76-78.

[3] ftM: ffl^XMMi, 1993.

[4] ^1. 4tM: 2017.8

[5] H. Meerkamm, "Product modeling: a prerequisite for effective product development," Proc. of Product Modeler, Erlangen, University of Erlangen, 1995, pp. 25-47.

References

[1] SUN Xiuwei, WANG Zhixin, LI Jing, et al. Design of progressive stamping mold for stapler bracket with automatic output [J]. Forging and pressing technology, 2020, 45(5):176-179

[2] Zhou Yousong. Convex mold design of continuous precision stamping mold [J]. Metal Processing (Cold Processing), 2023(2):76-78.

[3] SUN Haoqi. Motor end cover stamping process and mold structure design [M]. Beijing:National Defense Industry Press, 1993.

[4] Cheng Hong. Stamping process and mold design [M]. Beijing: Machinery Industry Press, 2017.8

[5] H. Meerkamm, "Product modeling: a prerequisite for effective product development," Proc. of Product Modeler, Erlangen, University of Erlangen, 1995, pp. 25-47.

i Надоели баннеры? Вы всегда можете отключить рекламу.