CC BY
29SCIENTIFIC PROGRESS VOLUME 3 I ISSUE 7 I 2022 _ISSN: 2181-1601
Scientific Journal Impact Factor (SJIF 2022=5.016) Passport: http://sjifactor.com/passport.php?id=22257
MAIN PRINCIPLES OF LESSON PLANNING
Bakhromjon Juraboev Khilola Mamadiyorova
Chirchik State Pedagogical University Chirchik State Pedagogical University
ABSTRACT
The following article illustrates a lesson plan is the instructor's road map of what students need to learn and how it will be done effectively during the class time. Before you plan your lesson, you will first need to identify the learning objectives for the class meeting. Then, you can design appropriate learning activities and develop strategies to obtain feedback on student learning. A successful lesson plan addresses and integrates these three key components:
Keywords: personal anecdote, historical event, thought-provoking dilemma, real-world example, short video clip, practical application, probing question.
INTRODUCTION
Specifying concrete objectives for student learning will help you determine the kinds of teaching and learning activities you will use in class, while those activities will define how you will check whether the learning objectives have been accomplished.
Below are six steps to guide you when you create your first lesson plans. Each step is accompanied by a set of questions meant to prompt reflection and aid you in designing your teaching and learning activities.
Outline learning objectives
The first step is to determine what you want students to learn and be able to do at the end of class. To help you specify your objectives for student learning, answer the following questions:
• What is the topic of the lesson?
• What do I want students to learn?
• What do I want them to understand and be able to do at the end of class?
• What do I want them to take away from this particular lesson?
Once you outline the learning objectives for the class meeting, rank them in terms of their importance. This step will prepare you for managing class time and accomplishing the more important learning objectives in case you are pressed for time. Consider the following questions:
• What are the most important concepts, ideas, or skills I want students to be able to grasp and apply?
• Why are they important?
SCIENTIFIC PROGRESS VOLUME 3 I ISSUE 7 I 2022 _ISSN: 2181-1601
Scientific Journal Impact Factor (SJIF 2022=5.016) Passport: http://sjifactor.com/passport.php?id=22257
• If I ran out of time, which ones could not be omitted?
• And conversely, which ones could I skip if pressed for time?
Develop the introduction
Now that you have your learning objectives in order of their importance, design the specific activities you will use to get students to understand and apply what they have learned. Because you will have a diverse body of students with different academic and personal experiences, they may already be familiar with the topic. That is why you might start with a question or activity to gauge students' knowledge of the subject or possibly, their preconceived notions about it. For example, you can take a simple poll: "How many of you have heard of X? Raise your hand if you have." You can also gather background information from your students prior to class by sending students an electronic survey or asking them to write comments on index cards. This additional information can help shape your introduction, learning activities, etc. When you have an idea of the students' familiarity with the topic, you will also have a sense of what to focus on.
Develop a creative introduction to the topic to stimulate interest and encourage thinking. You can use a variety of approaches to engage students
Consider the following questions when planning your introduction:
• How will I check whether students know anything about the topic or have any preconceived notions about it?
• What are some commonly held ideas (or possibly misconceptions) about this topic that students might be familiar with or might espouse?
• What will I do to introduce the topic?
Plan the specific learning activities (the main body of the lesson)
Prepare several different ways of explaining the material (real-life examples, analogies, visuals, etc.) to catch the attention of more students and appeal to different learning styles. As you plan your examples and activities, estimate how much time you will spend on each. Build in time for extended explanation or discussion, but also be prepared to move on quickly to different applications or problems, and to identify strategies that check for understanding. These questions would help you design the learning activities you will use:
• What will I do to explain the topic?
• What will I do to illustrate the topic in a different way?
• How can I engage students in the topic?
• What are some relevant real-life examples, analogies, or situations that can help students understand the topic?
• What will students need to do to help them understand the topic better?
SCIENTIFIC PROGRESS VOLUME 3 I ISSUE 7 I 2022 _ISSN: 2181-1601
Scientific Journal Impact Factor (SJIF 2022=5.016) Passport: http://sjifactor.com/passport.php?id=222ff7
Plan to check for understanding
Now that you have explained the topic and illustrated it with different examples, you need to check for student understanding - how will you know that students are learning? Think about specific questions you can ask students in order to check for understanding, write them down, and then paraphrase them so that you are prepared to ask the questions in different ways. Try to predict the answers your questions will generate. Decide on whether you want students to respond orally or in writing. To help you generate some ideas and you can also ask yourself these questions:
• What questions will I ask students to check for understanding?
• What will I have students do to demonstrate that they are following?
• Going back to my list of learning objectives, what activity can I have students do to check whether each of those has been accomplished?
An important strategy that will also help you with time management is to anticipate students' questions. When planning your lesson, decide what kinds of questions will be productive for discussion and what questions might sidetrack the class. Think about and decide on the balance between covering content (accomplishing your learning objectives) and ensuring that students understand.
Develop a conclusion and a preview
Go over the material covered in class by summarizing the main points of the lesson. You can do this in a number of ways: you can state the main points yourself ("Today we talked about..."), you can ask a student to help you summarize them, or you can even ask all students to write down on a piece of paper what they think were the main points of the lesson. You can review the students' answers to gauge their understanding of the topic and then explain anything unclear the following class. Conclude the lesson not only by summarizing the main points, but also by previewing the next lesson. How does the topic relate to the one that's coming? This preview will spur students' interest and help them connect the different ideas within a larger context.
Create a realistic timeline
GSIs know how easy it is to run out of time and not cover all of the many points they had planned to cover. A list of ten learning objectives is not realistic, so narrow down your list to the two or three key concepts, ideas, or skills you want students to learn. Instructors also agree that they often need to adjust their lesson plan during class depending on what the students need. Your list of prioritized learning objectives will help you make decisions on the spot and adjust your lesson plan as needed. Having additional examples or alternative activities will also allow you to be flexible. A realistic timeline will reflect your flexibility and readiness to adapt to the specific classroom environment. Here are some strategies for creating a realistic timeline:
SCIENTIFIC PROGRESS VOLUME 3 I ISSUE 7 I 2022 _ISSN: 2181-1601
Scientific Journal Impact Factor (SJIF 2022=5.016) Passport: http://sjifactor.com/passport.php?id=222ff7
• Estimate how much time each of the activities will take, then plan some extra time for each
• When you prepare your lesson plan, next to each activity indicate how much time you expect it will take
• Plan a few minutes at the end of class to answer any remaining questions and to sum up key points
• Plan an extra activity or discussion question in case you have time left
• Be flexible - be ready to adjust your lesson plan to students' needs and focus on what seems to be more productive rather than sticking to your original plan.
Presenting the Lesson Plan
Letting your students know what they will be learning and doing in class will help keep them more engaged and on track. You can share your lesson plan by writing a brief agenda on the board or telling students explicitly what they will be learning and doing in class. You can outline on the board or on a handout the learning objectives for the class. Providing a meaningful organization of the class time can help students not only remember better, but also follow your presentation and understand the rationale behind in-class activities. Having a clearly visible agenda (e.g., on the board) will also help you and students stay on track.
Reflecting on Your Lesson Plan
A lesson plan may not work as well as you had expected due to a number of extraneous circumstances. You should not get discouraged - it happens to even the most experienced teachers! Take a few minutes after each class to reflect on what worked well and why, and what you could have done differently. Identifying successful and less successful organization of class time and activities would make it easier to adjust to the contingencies of the classroom.
To be effective, the lesson plan does not have to be an exhaustive document that describes each and every possible classroom scenario. Nor does it have to anticipate each and every student's response or question. Instead, it should provide you with a general outline of your teaching goals, learning objectives, and means to accomplish them. It is a reminder of what you want to do and how you want to do it. A productive lesson is not one in which everything goes exactly as planned, but one in which both students and instructors learn from each other.
CONCLUSION
Action research starts when teachers identify an issue they wish to investigate, for instance, know more about the learners and what they consider motivating and challenging. Teachers might want learn more about themselves as teachers, how
SCIENTIFIC PROGRESS VOLUME 3 I ISSUE 7 I 2022 _ISSN: 2181-1601
Scientific Journal Impact Factor (SJIF 2022=5.016) Passport: http://sjifactor.com/passport.php?id=222ff7
effective they are, how they look to their students, how they would look to themselves if they were observing their own teaching. They might want to see if an activity would work better done in groups rather than in pairs, or investigate whether reading is more effective with or without pre-teaching vocabulary. Having collecting the data, they analyze the results, and this is on the basis of these results teachers should decide what to do next. Alternatively, having resolved one issue, teachers may focus on a different problem and start the process afresh for that issue.
REFERENCES
1. Joraboyev, Bahromjon Bakhtiyor Ogli. "Using authentic materials on english lessons." Academic research in educational sciences 2.2 (2021): 1018-1025.
2. Juraboyev, Bakhromjon Bakhtiyor Ugli. "Problems and solutions for online teaching and learning of foreign languages." Academic research in educational sciences 2.Special Issue 2 (2021): 127-131.
3. Juraboyev, Akmal Bakhramovich. "MODERN LIGHTING AND UNDERSTANDING OF METHODS AND CATEGORIES OF PHYSICAL CULTURE." Academic research in educational sciences 2.2 (2021): 1255-1261.
4. Juraboyev, Bakhromjon. "DEVELOPING COMMUNICATION SKILLS BY USING GAMES." Scientific progress 2.4 (2021): 486-490.
5. Jo, Baxromjon Baxtiyor O'G'Li. "Effective methods of teaching a foreign language in primary school." Science and Education 2.4 (2021): 288-293.
