Научная статья на тему 'ENERGY-SAVING "PYROLYSIS OVEN" AND ITS MAIN ADVANTAGES AND DISADVANTAGES'

ENERGY-SAVING "PYROLYSIS OVEN" AND ITS MAIN ADVANTAGES AND DISADVANTAGES Текст научной статьи по специальности «Строительство и архитектура»

CC BY
53
12
i Надоели баннеры? Вы всегда можете отключить рекламу.
Ключевые слова
PYROLYSIS / HEATING SYSTEM / FURNACE / EFFICIENCY / ENERGY EFFICIENCY

Аннотация научной статьи по строительству и архитектуре, автор научной работы — Umaraliev Komil, Ergashev Sirojiddin

This article presents methods for determining the energy efficiency of pyrolysis furnaces used in heating systems, and an analysis of the efficiency, advantages, and disadvantages of pyrolysis furnaces.

i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Текст научной работы на тему «ENERGY-SAVING "PYROLYSIS OVEN" AND ITS MAIN ADVANTAGES AND DISADVANTAGES»

Д UNIVERSUM:

№ 5 (98)_-V, r ■■■ - ._май. 2022 г.

POWER, METALLURGICAL AND CHEMICAL ENGINEERING

ENERGY-SAVING "PYROLYSIS OVEN" AND ITS MAIN ADVANTAGES AND DISADVANTAGES

Komil Umaraliev

Master's degree, Fergana Polytechnic Institute Uzbekistan, Fergana E-mail: nurmuhammad@bk.ru

Sirojiddin Ergashev

Doctor of technical sciences, Fergana Polytechnic Institute, Uzbekistan, Fergana

ЭНЕРГОСБЕРЕГАЮЩАЯ «ПИРОЛИЗНАЯ ПЕЧЬ» И ЕЕ ОСНОВНЫЕ ПРЕИМУЩЕСТВА И НЕДОСТАТКИ

Умаралиев Комил Нурмаматович

магистр,

Ферганский политехнический институт, Республика Узбекистан, г. Фергана

Эргашев Сирожиддин Фаязович

д-р техн. наук, Ферганский политехнический институт, Республика Узбекистан, г. Фергана

ABSTRACT

This article presents methods for determining the energy efficiency of pyrolysis furnaces used in heating systems, and an analysis of the efficiency, advantages, and disadvantages of pyrolysis furnaces.

АННОТАЦИЯ

В данной статье представлены методы определения энергоэффективности пиролизных печей, используемых в системах отопления, а также анализ эффективности, преимуществ и недостатков пиролизных печей.

Keywords: pyrolysis, heating system, furnace, efficiency, energy efficiency. Ключевые слова: энергоэффективность, пиролиз, система отопления, КПД, печь.

Introduction

It is known that the pyrolysis process is used in the chemical industry as the main technology for the production of products, as an energy-saving technology for heating buildings and structures in housing and communal services. In the oil industry, pyrolysis is the only technology for the separation of some products, but it is the process that ensures the optimal combustion of combustible products in heating devices [1-2]. The complex gas released during the pyrolysis process was actively used as a fuel for internal combustion engines in the 30s to 60s of the last century [1]. Today, pyrolysis gas is still used as a fuel for forestry vehicles. Pyrolysis furnaces for heating homes on individual farms are notable for their ease of operation and low fuel

consumption[2]. In Central Asia, pyrolysis furnaces are almost never used in individual systems of households and small enterprises and institutions. In areas with limited natural gas resources, along with solar installations and micro-hydro power plants [3-8, 22-25], complexes of pyrolysis furnaces and gas generators operating on this energy-saving technology can solve the problem of electricity and natural gas shortages [1]. Therefore, the study of these pyrolysis furnaces and gas generators can be considered a topical issue.

Research method

For 70 years, various scientific research has been carried out at the Fergana Polytechnic Institute in the fields of technology, such as economics, chemistry, construction, mechanics, energy, electronics,

Библиографическое описание: Umaraliev K.N., Ergashev S.F. ENERGY-SAVING "PYROLYSIS OVEN" AND ITS MAIN ADVANTAGES AND DISADVANTAGES // Universum: технические науки : электрон. научн. журн. 2022. 5(98). URL: https://7universum.com/ru/tech/archive/item/13684

№ 5 (98)

А1

UNIVERSUM:

ТЕХНИЧЕСКИЕ НАУКИ

instrumentation, specific research methods have been developed and applied [9-25]. We use process analysis when choosing a research method to successfully solve a given problem.

A pyrolysis furnace is the main energy source of the heating system, its energy efficiency is determined by determining the consumption of the "conventional fuel unit", calculating the energy balance of the heated object, and integrated assessment of the amount of energy required to maintain this energy balance in changing natural conditions methods. The final integral is needed to determine the energy capacity of the pyrolysis furnace (in terms of heat). It is also necessary to take into account the heat and electricity consumed by the control system.

It is known that it is not possible to directly measure the heat energy given off by a fuel product during combustion, this energy can only be found by multiplying the relative combustion heat of that fuel by the weight of the fuel. . Typically, the relative heat of combustion of the fuel is obtained from references and different GOSTs for different fuels, for example, GOST 10062-75 - for natural gas, 21261-91 - for liquid petroleum products, 147-95 - for coal, for peat and others. However, given that the composition of the fuel used in practice is constantly changing, and that the heat energy that this composition produces during combustion also changes, the amount of energy calculated is approximate. Nevertheless, we need to evaluate the energy efficiency of the pyrolysis furnace. To solve this problem, experimentally determine the weight of the energy-supplying fuel that provides the energy balance of the heated object and calculate the energy consumption by multiplying the relative combustion heat of that amount of fuel by the weight of the fuel, and finally, the ratio of energies can be calculated. The size obtained by this method depends on the heating system tested, but mainly on the energy efficiency of the furnace under test.

Of course, an artificial heating system can be used as the object of the above experiment, but it is preferable to use a real object because this experiment is associated with much higher energy consumption.

The difference between pyrolysis furnaces and conventional furnaces is that the combustion process in this furnace consists of two stages, in the first stage the coking produces solid residues of fuel and gas, and in the second stage, the solid residues of the separated gas and fuel are completely burned.

This type of stove burns the wood completely and produces very little ash. As a result, the fuel burns in the pyrolysis furnace for a long time. In practice, the ash from such furnaces is cleaned once every few days.

май, 2022 г.

In addition, the useful life of any heating system is several decades, during which time it is desirable to use the literature data to account for large-scale changes in the operating modes of the heating system due to climate change.

So, we choose the data analysis method as the research method.

According to the manufacturers, medium-capacity (10-20 kW) furnaces installed in a 100 m2 apartment building can burn 10-12 hours of fuel per refill. Daily fuel consumption can be 10-11 kg of solid wood. Compared to conventional furnaces, this is 2 or more times the fuel-saving efficiency.

Depending on the moisture content of the fuel, this efficiency varies widely:

burning 1 kg of wood with a moisture content of 20% - 4 kW

burning 1 kg of wood with a moisture content of 50% - provides 2 kW of power.

Advantages of pyrolysis furnaces:

• High fuel efficiency due to long and complete combustion

• Environmental safety, which emits very little smoke, mainly SO and water vapor, resulting in clean and dry smoke ducts.

• The fuel heats up very quickly.

• Has a high efficiency (85% - 90%).

• Ability to operate in a large power range (5% to 100% of maximum power).

• Possibility to connect to any heating system -with natural circulation and forced circulation.

• Possibility to use different types of fuel, solid wood, liquid fuel ...

• Ease of use, once a day wood burning and once a few days ash removal.

These ovens have the following disadvantages:

• The size is too big.

• Need a place to store firewood.

• Water pump, fan, and thermocouple are required for proper operation and control, which in turn creates an electrical connection.

• Condensate can build up in the smoke path, so the smoke path needs heat protection.

Pyrolysis furnaces are divided into two depending on the type of smoke:

• natural smoke extraction;

• Compulsory smoking.

Natural smoke extraction is created using a high smoke extraction pipe. Forced smoke extraction is generated using an electric motor fan. Forced smoke weighing furnace is more efficient but depends on electricity.

№ 5 (98)

А1

UNIVERSUM:

ТЕХНИЧЕСКИЕ НАУКИ

май, 2022 г.

heating pipe outlet

chimney

fan

heating pipe inlet

oven control

air channel

refractory brick

refractory brick

ГЗЯп

combustion chamber

Шшшт

Figure 1. Construction of a long-burning pyrolysis furnace

The following are the disadvantages and advantages of forced and natural smoke kilns:

Smoke Advantages Disadvantages

Compulsory 1. The combustion chamber and the heating system heat up quickly 2. Accelerates the transition to pyrolysis 3. Combustion products come out of the oven quickly 4. Pyrolysis and combustion process is controlled automatically 5. The combustion time of the fuel is large Depends on electricity

natural 1. Relatively easy to use 2. breakdown are rare 3. The price is much cheaper 1. Needs to be cleaned relatively often 2. The installation cost is high

Conclusion

With the advantages and disadvantages listed

above, these stoves are the second most energy-efficient

after gas heating systems.

References:

1. L.K. Kollerov. Gazomotornie ustanovki. MAShGIZ Moskva - 1951.

2. Novie texnologii v teplosnabjenii i stroitelstve: sbornik rabot aspirantov i studentov - sotrudnikov nauchno-issle-dovatelskoy laboratorii «Teplo energeticheskie sistemti i ustanovki». Vipusk 17. [Elektronniy resurs]. - Elektronnie dannie. Ulyanovsk: UlGTU, 2019.- 146 s.

3. Mukhitdinov, M.M., and S.F. Ergashev. "Solnechnye parabolotsilindricheskie ustanovki." Tashkent: Fan (1995).

4. Ergashev Sirojiddin Fayazovich, Nigmatov Ulugbek Jurakuzievich, Abduganiev Numonjon Nabijonovich, Yunusov Boxodirxuja Saydi-Axmadovich. Solnechnie parabolosilindricheskie elektrostansii - covremennoe sostoyanie rabot i perspektivi ispolzovaniya ix v narodnom xozyaystve Uzbekistana // Dostijeniya nauki i obrazovaniya. 2018. №5 (27). URL: https://cyberleninka.ru/article/n7solnechnye-parabolotsilindricheskie-elektrostantsii-covremennoe-sos-toyanie-rabot-i-perspektivy-ispolzovaniya-ih-v-narodnom (data obrasheniya: 05.05.2022).

5. Ergashev S.F. i dr. Mikro-GES moshnostyu 5 Kvt dlya individualnix potrebiteley //Izvestiya Oshskogo texnologicheskogo universiteta. - 2019. - №. 2. - S. 168-170.

6. Ergashev S.F., Tojiboev A.K. Raschot ustanovlennoy i raschotnoy moshnosti bitovix elektropriborov dlya invertora s ogranichennoy vixodnoy moshnostyu //Injenernie resheniya. - 2019. - №. 1. - S. 11-16.

A UNiVERSUM:

№ 5 (98)_- * ♦ > г ■■■ - ._май. 2022 г.

7. Ergashev S.F., Kuldashov O.X., Otakulov O.X., Umaraliev N., Muxammadjonov X.Z. Avtomatizirovannaya sistema izmereniya temperaturi solnechnix energeticheskix ustanovok // NTJ FerPI, 2020, T.24, №4 S. 82-86.

8. Ergashev S.F. i dr. Energoeffektivniy treker bez ispolzovaniya svetozavisimix datchikov (Fotorezistorov, fotodiodov i td) //Izvestiya Oshskogo texnologicheskogo universiteta. - 2019. - №. 3. - S. 234-236.

9. Umaraliev N. Optoelektronnie pervichnie izmeritelnie preobrazovateli lineynoy plotnosti shelka - sirsa i nitey iz naturalnogo shelka: Dis... kand. texn. nauk. - Tashkent, 1991.

10. Umaraliev N., Matbabaev M.M., Ergashev K.M. Ustanovka dlya izucheniya optoelektronnogo datchika vlajnosti vozduxa //Izvestiya visshix uchebnix zavedeniy. Priborostroenie. - 2020. - T. 63. - №. 3. - S. 237-241.

11. Nurmamat, U., & Kaxramon, E. (2021). Influence of the probabilistic nature of the change in the measured quantity on the measurement error. Universum: texnicheskie nauki, (12-7 (93)), 20-23.

12. Umaraliev N., Matbabaev M.M. Ustanovka dlya kalibrovki optoelektronnix datchikov vlajnosti vozduxa //Nauchno-texnicheskiy jurnal. - 2019. - T. 23.

13. Kuldashov, O H.; Umaraliev, N; Ergashev, K M. (2021) "Stabilization of the parameters of a two-wave optoelectronic device," Scientific-technical journal: Vol. 4: Iss. 2, Article 5. Available at: https://uzjournals.edu.uz/ferpi/vol4/iss2/5

iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.

14. Raximov, R X.; Umaraliev, N; Djalilov, ML; Maksudov, A U. (2018) Regressionnie modeli dlya prognozirovaniya zemletryaseniy. Computational nanotechnology, №2, s. 40-45

15. Urozaliev Gayratjon Turonovich Optoelektronnoe mexatronnoe ustroystvo s distansionnim upravleniem // Universum: texnicheskie nauki. 2021. №10-4 (91).

16. Urozaliev Gayrat Turonovich, TojiboevAbrorKahorovich (2021). Use of four-stroke lifting converters in tracking systems of solar plants. Electronic journal of actual problems of modern science, education and training. T-9, 2:94-98.

17. Urozaliyev Gayratjon Turonovich, Butayev Tuxtasin (2020). International journal of advanced research in science, engineering and technology. T-7, 7: 56-69.

18. Urozaliev Gayratjon, Turonovich Tuxtasin Bo'taev (2020). Alternativ energiya manbalarini iste'molchilarini model-lash bosqichlari. Scientific-technical journal (STJ FerPI, FarPI ITJ, NTJ FerPI. T-24, 1:163-166.

19. Ergashev Qaxramon, Bo'taev To'xtasin, Urozaliev Gayratjon Turonovich (2020). Ob'ekt zararlanganligini masofadan nazorat qiluvchi mexatron qurilma. Scientific-technical journal (STJ FerPI, FarPI ITJ, NTJ FerPI. T-24, 1:175-178.

20. Boymirzaev Anvar Rahmonaliyevich, Tojiboev Abror Kahorovich, Urozaliev Gayrat Turonovich (2020). International journal for advanced research in science & technology. T-10. 5:1-5.

21. Raxmonov X.T., Tuxtasin Bo'taev, Urozaliev Gayratjon Turonovich (2020). Prinsipi postroeniya optoelektronnogo preobrazovatelya plotnosti ovalnogo ob'ekta. Scientific-technical journal (STJ FerPI, FarPI ITJ, NTJ FerPI. T-24, 5:221-226.

22. Tojiboev Abror Kahorovich, Urozaliev Gayrat Turonovich, Hakimov Murodjon Fozilovich, Rahmonov Dilmurod Husanboyevich (2020). Use in systems with sunny batteries of four-stage liftly wide pulse converters. ACADEMI-CIA: An International Multidisciplinary Research Journal. T-10. 5:796-802.

23. Kuchkarov A.A., Muminov Sh.A.U. Modelirovanie i sozdanie ploskogo frenelevskogo lineynogo zerkalnogo solnechnogo konsentratora //Universum: texnicheskie nauki. - 2020. - №. 3-2 (72). - S. 80-85.

24. Abdurakhmanov A. et al. Analytical approaches of calculation of the density distribution of radiant flux from the sun for parabolic-cylindrical mirror-concentrating systems //Applied Solar Energy. - 2016. - T. 52. - №. 2. - S. 137.

25. Axmadaliyevich, Kuchkarov Akmaljon, et al. Calculation of optical-geometrical characteristics of parabolic-cylindrical mirror concentrating systems // European science review 1-2 (2017): 201-203.

i Надоели баннеры? Вы всегда можете отключить рекламу.