CC BY
9
COMPREHENSIVE EVALUATION OF DICTIONS OF TWO LAYER KNITTED TEXTILE FABRICS FROM COTTON AND POLYESTER YARN
Lazizbek Uralov
Basic doctoral student of Namangan Institute of Engineering and Technology Republic of Uzbekistan, Namangan E-mail: Azizbekjaloliddinov551 @gmail.com
Kurbanali Kholikov
Professor
of Namangan Institute of Engineering and Technology Republic of Uzbekistan, Namangan E-mail: [email protected]
Umarjon Melibaev
Candidate of technical Sciences, docent Namangan Institute of engineering and technology, Republic of Uzbekistan, Namangan
Dilafruz Vakhobova
Basic doctoral student of Namangan Institute of Engineering and Technology Republic of Uzbekistan, Namangan
КОМПЛЕКСНАЯ ОЦЕНКА ПОКАЗАТЕЛЕЙ ДВУХСЛОЙНОЙ ТРИКОТАЖНОЙ ТКАНИ
ИЗ ХЛОПКОВОЙ И ПОЛИЭФИРНОЙ ПРЯЖИ
Уралов Лазизбек Сойибназар углы
докторант
Наманганского инженерно-технологического института Республика Узбекистан, г. Наманган
Холиков Курбанали Мадаминович
профессор
Наманганского инженерно-технологического института Республика Узбекистан, г. Наманган
Мелибаев Умаржон Хайдарович
канд. техн. наук, доцент Наманганский инженерно-технологический институт, Республика Узбекистан, г. Наманган
Вахобова Дилафруз Гайратовна
докторант
Наманганского инженерно-технологического института Республика Узбекистан, г. Наманган
ABSTRACT
The article used a complex assessment method to determine the quality of two-layer knitted fabric samples made of cotton polyester yarn. As a result of the analysis of the complex assessment diagram and histogram of the quality indicators of the studied samples, variant III of double-layered knitted fabric of cotton and polyester yarn was found to be the best option.
АННОТАЦИЯ
В статье рассмотрен комплексный метод оценки качества образцов двухслойного трикотажного полотна из хлопчатобумажной и полиэфирной пряжи. В результате анализа комплексной оценочной диаграммы и гистограммы показателей качества исследуемых образцов лучшим вариантом был признан вариант III двухслойного трикотажа из хлопчатобумажной и полиэфирной пряжи.
Библиографическое описание: COMPREHENSIVE EVALUATION OF DICTIONS OF TWO LAYER KNITTED TEXTILE FABRICS FROM COTTON AND POLYESTER YARN // Universum: технические науки : электрон. научн. журн. Uralov L.S. [и др.]. 2022. 6(99). URL: https://7universum.com/ru/tech/archive/item/13972
Keywords: raw materials, technology, products, polyester, complex, analysis, properties, diagram, physico-mechan-ical, polygon, radius-vectors.
Ключевые слова: сырье, технология, продукция, полиэстер, комплекс, анализ, свойства, схема, физико-механический, полигон, радиус-векторы.
In the production of knitted goods in the country, enterprises use mainly local raw materials, mainly cotton yarn. The technological capabilities of modern knitting machines installed in joint ventures are not fully used. Therefore, to make full use of the capabilities of knitting machines installed in joint ventures, efficient use of local raw materials, expand knitted products, knitwear that can meet the requirements of competitive, high-quality, domestic and foreign markets to replace imports production is one of the current problems.
In order to solve the above-mentioned problems and take full advantage of the technological capabilities of knitting machines installed in knitting enterprises, methods for obtaining double-layered backed knitted fabrics of a new structure have been developed.
Five variants of double-layered knitted fabric made of cotton and polyester yarn were woven on a 26-class double-loop needle knitting machine manufactured by Taiwanese company WELL KNIT [1].
Our cotton and polyester yarn double-layered backing knitwear was made using 20-ply cotton yarn and 300D polyester yarn. The report of the double-layered knitted fabric of cotton and polyester yarn consists of glad and press rows.
I variant
A photo of the proposed knitwear is shown in Figure 1.
The pattern of the two-layer knitted fabric of cotton and polyester yarn differs from each other by the pattern of the stitches used to attach the layers and the sequence of reports.
In order to study the effect of changes in the reports and the sequence of throwing the yarn on the new structure of double-layered knitted fabric woven from cotton and polyester yarn on the basis of glad and press two Technological parameters and physical and mechanical properties of 5 variants of layered knitted patterns were determined and analyzed experimentally on modern equipment installed in the laboratory for testing textile-knitted patterns at the Namangan Institute of Engineering and Technology.
The above-mentioned technological parameters of the two-layer backed knitted fabric of the new structure of cotton and polyester yarn showed that the volume densities of the fabric are relatively low compared to the base fabric (Option I), 131.6 mg / cm3 from 143.05 mg / cm3. As the amount of press rings in the knitted fabric increases, the bulk density of the knit decreases (Figure 2).
II variant
III variant IV variant
V variant
Figure 1. Photo of the new structure of the two-layer backed knitted fabric
From the above analysis of the physical and mechanical properties of the two-layer backed knitted fabric, it was found that the air permeability of the
knitted fabric has a positive effect due to the use of press tissue in the two-layer backing. (Figure 2).
№ 6 (99)
A UNI
/Ш. ТЕ)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июнь, 2022 г.
Table 1
Physico-mechanical properties of two-layer back tissue
Parameters Versions
Sample 1 Sample 2 Sample 3 Sample 4 Sample 5
Types of threads, linear density Back layer 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread
Front layer 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread 20 tex Cotton thread
weft Polyester 300 D
Air permeability V (sm3/sm2-sek) 59,2 66,3 51,8 54,4 84,4
Interruption power R (N) along 262 311 425 151 232
width 259 660 813 208 171
Stretch to break L (%) along 72,9 67,75 87,65 67 136,1
width 108,1 27 35,85 29,55 223,9
Irreversible deformation £h (%) along 9,4 9,4 23,8 26,3 20,5
width -27,7 17,6 23,5 14,2 30,7
Reversible deformation So (%) along 90,6 90,6 76,2 73,7 79,5
width 127,7 82,4 76,5 85,8 69,3
The shrinkage of the fabric K (%) along 1 2 3 4 4
width 4 5 5 6 5
Friction resistance I (thousandth circle) 45,4 40 37,8 26,5 36,5
Table 2.
Technological parameters of double-layered knitted fabric
Parametres Versions
Sample 1 Sample 2 Sample 3 Sample 4 Sample 5
Thread type, linear densities Back layer 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn
Front layer 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn 20 tex cotton yarn
weft Polyester 300 D
Ring step A (mm) Back layer 0,91 0,96 0,89 0,89 1,1
Front layer 0,94 0,94 0,89 0,81 1,1
Row height B (mm) Back layer 0,76 0,73 0,6 0,60 0,69
Front layer 0,71 0,74 0,58 0,67 0,73
Horizontal density Rg (number of rings) Back layer 53 52 56 56 45
Front layer 55 53 56 61 45
Vertical density Rv (number of rings) Back layer 65 0,73 86 82 68
Front layer 70 0,74 82 74 72
Ring strip length L (mm) Back layer 4,35 3,46 3,2 3,58 3,7
Front layer 3,81 3,56 2,83 3,13 4
Knitted surface density Ms (gr / m2) 261 254,9 309 279 210,1
Knitting thickness T (mm) 1,74 1,79 2,16 2,12 1,59
Volume density 6 (mg/sm3) 150 142,4 143,05 131,6 132,1
Absolute volume relief A5 (mg/sm3) - 7,6 6,95 18,4 17,9
Relative relief 9, % - 5,06 4,6 12,3 11,9
№ 6 (99)
A UNI
/Ш. ТЕ)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июнь, 2022 г.
A number of factors that shape the structure and properties of the fabric must be taken into account to determine the best options for a two-layer backed knitted fabric derived from glad and press fabrics. Therefore, a method for constructing a complex evaluation diagram and a comparison histogram of two-layer knitted fabric indicators was selected to compare the experimental results obtained (Figures 2-3). Physico-mechanical and technological indicators of tissues are shown in 1,2-th tables.
The complex diagram is constructed in such a way that its largest contour shows the best quality of the knitted fabric produced, i.e. the closer the contour is to the outer line, the higher the quality of the knitted fabric and obtained the area of the polygon is so large.
The indicators under analysis are those that have a significant impact on the physico-mechanical and hygienic properties and save valuable raw materials. Surface and volume densities, the proportion of reversible and irreversible deformations, and the penetration are among such indicators.
The construction of a complex evaluation polygon on the quality indicators of a two-layer backed knitted fabric consists of a series of joining of points separated by radius-vectors describing each property.
At the same time, the most economical technology, which allows you to produce high quality products, will have maximum space.
The area of a polygon is calculated as the sum of the area of a triangle, where the radius vectors divide the polygon into triangles.
The area of each triangle is determined by the following formula:
S =1 • a • b • sina , % 2
(1)
Here: a, b-radius vectors forming a triangle, a is the angle between the radius vectors.
The value of the surface area obtained from the complex evaluation diagram is expressed by a comparative histogram of the quality indicators of knitted fabrics.
Figure 2. Diagram of a complex assessment of the quality of two-layer backed knitted fabric □ -variant I I I -variant II I I -variant III I I -variant IV I I -variant V
The results of a complex diagram and comparative histogram on the quality of two-layer backed knitted fabric showed that the variant III of the knitted fabric consisting of 20 tex cotton yarn and 300 D polyester comparative histogram (3- picture) (2104 mm2) was found to be the best option. It is advisable to use it for domestic
and household knitwear, as the shape, hygienic and air permeability properties of this fabric have been noted.
New types of knitted fabrics based on mixed fabrics with different consumption of raw materials, physical and mechanical properties and consumer properties to create a new range of high quality knitted products using
№ 6 (99)
UNIVERSUM:
ТЕХНИЧЕСКИЕ НАУКИ
июнь, 2022 г.
the presented tissue structure formation methodology was created [2, 3, 4, 5] .
Figure 3. Comparative histogram of quality indicators of two-layer backed knitted fabrics
As a result of the analysis of the diagram and histogram of the complex evaluation of the quality indicators of the studied samples, it was determined that variant III
of the double-layered knitted fabric was found as the best sample and recommended for production.
References:
1. Senthil Kumar B., Ramachandran T. Influence of knitting process parameters on the thermal comfort properties of eri silk knitted fabrics. Fibers and Textiles in Eastern Europe Volume 26, Issue 5, 47-53p. (2018).
2. Kholikov K.M; Zhuraboev A.T; Shogofurov Sh.Sh; Abduvaliev D.M. (2020) Comprehensive assessment of the two-layer knitwear quality. The Way of Science. 2020. № 1 (71). http://scienceway.ru/f7the_way_of_science_no_1_71_ january. pdf#page=24
3. Jurabayev N., Shogofurov S., Kholikov K., & Meliboev U. (2021). Study of the fabric structure influence on the physical-mechanical and technological properties of knitted products. In E3S Web of Conferences (Vol. 304, p. 03030). EDP Sciences.
4. Shogofurov Sh. Sh., Kamalova I.I., Xolikov K.M. (2021). Study of the Effect of Changes on the Technological and Physical-Mechanical Properties of Knitting in a New Structure. Engineering, 13(6), 287-299.
5. Shogofurov Sh.Sh., Xolikov Q.M. (2021). Research of pattern in a new structure knitting fabrics. In ЭКОНОМИКА. СОЦИОЛОГИЯ. ПРАВО (pp. 26-28).
