Научная статья на тему 'Development of 2 μm fiber front-end for Ho:YAG thin disk amplifier'

Development of 2 μm fiber front-end for Ho:YAG thin disk amplifier Текст научной статьи по специальности «Медицинские технологии»

CC BY
116
38
i Надоели баннеры? Вы всегда можете отключить рекламу.
i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Текст научной работы на тему «Development of 2 μm fiber front-end for Ho:YAG thin disk amplifier»

HiLASE-PS-1

Development of 2 ^m fiber front-end for Ho:YAG thin disk amplifier

J. Huynh1,2, J. Cernohorská1,2, M. Písarík1, P. Peterka3, M. Smrz1, T. Mocek1

1HiLASE Centre, Institute of Physics of the Czech Academy of Sciences, Dolní Brezany, Czech

Republic

2Czech Technical University in Prague- Faculty of Nuclear Sciences and Physical Engineering, Department of Physical Electronics, Praha, Czech Republic

3Institute of Photonics and Electronics ASCR- v.v.i, Fiber lasers and non-linear optics, Praha, Czech Republic

Over the past years mid-infrared lasers have attracted considerable technological and scientific interests. 2 um sources can be used in various applications such as: remote sensing [1], free space communication [2], LIDAR [3], material processing of polymers [4], medicine and surgery [5], or pump sources for mid-IR OPA [6].

In this paper we present development of 2 p,m fiber front-end for Ho: YAG thin disk amplifier with average power >10 W. The front-end consists of passively mode-locked soliton holmium fiber ring oscillator followed by thulium/holmium-fiber tandem amplifier. Self-starting holmium fiber oscillator work in soliton operation at 23 MHz repetition rate, 15 mW of output average power and 1 ps output pulse duration.

Progress and current status of 2 p,m laser system (PERLA D) at HiLASE centre will be presented.

References

[1] Upendra N. Singh, Brian M. Walsh, Jirong Yu, Mulugeta Petros, Michael J. Kavaya, Tamer F. Refaat, and Norman P. Barnes, "Twenty years of Tm:Ho:YLF and LuLiF laser development for global wind and carbon dioxide active remote sensing," Opt. Mater. Express 5, 827-837 (2015).

[2] Petros, M., Refaat T.F., Singh U.N., Yu J., Antill C., Remus R., Taylor B.D., Wong T.-H., Reithmaier, K., Lee J., Ismail S., Davis K.J., "Development of an advanced Two-Micron triple-pulse IPDA lidar for carbon dioxide and water vapor measurements," EPJ Web Conf. 176 01009 (2018) DOI: 10.1051/epjconf/201817601009.

[3] Orr, B. J. (2017). Infrared LIDAR Applications in Atmospheric Monitoring. In Encyclopedia of Analytical Chemistry, R. A. Meyers (Ed.). doi:10.1002/9780470027318.a0711.pub2.

[4] Ilya Mingareev, Fabian Weirauch, Alexander Olowinsky, Lawrence Shah, Pankaj Kadwani, Martin Richardson,Welding of polymers using a 2^m thulium fiber laser,Optics & Laser Technology,Volume 44, Issue 7,2012,Pages 2095-2099,ISSN 0030-3992,https://doi.org/10.1016/j.optlastec.2012.03.020.

[5] Kang, H. W., Lee, H. , Teichman, J. M., Oh, J. , Kim, J. and Welch, A. J. (2006), Dependence of calculus retropulsion on pulse duration during HO:YAG laser lithotripsy. Lasers Surg. Med., 38: 762772. doi: 10.1002/lsm.20376.

[6] D. Sanchez, M. Hemmer, M. Baudisch, S. L. Cousin, K. Zawilski, P. Schunemann, O. Chalus, C. Simon-Boisson, and J. Biegert, "7 ^m, ultrafast, sub-millijoule-level mid-infrared optical parametric chirped pulse amplifier pumped at 2 ^m," Optica 3, 147-150 (2016).

i Надоели баннеры? Вы всегда можете отключить рекламу.