Электротехника, электронная техника, информационные технологии список научных статей

Purpose. Development of methods and algorithms for calculation of starting modes of the induction motors with the squirrel-cage rotor. Methodology. Mathematical modelling of starting modes of asynchronous electric drives in various coordinate systems with the use of numerical methods for solving...

Introduction. The study is devoted to the development of the functionality of a railway track switch by introducing a switchedinductor electric drive. This solution justifies simplifying the mechanical part of the switches by changing the gearbox to a ballscrew and locating the all kinematic line...

Aim. Reducing of magnetic flux density of magnetic field in multi-storey building, generated by overhead power lines to the sanitary standards level by active shielding means. The tasks of the work are the synthesis, Computer simulation and experimental research of three-circuits system of active...

Goal. Checking the efficiency of the active rectifier with differences types of control systems in conditions of deep voltage distortions of a three-phase three-wire supply network. Methodology. The authors have used the Matlab/Simulink software environment to create a model of an active rectifier...

Purpose. Improving the principles of management of photovoltaic system with storage battery and with autonomous functioning during daylight hours for a local object, connected to the grid with multi-zone payment when excluding the generation of energy into the grid. Methodology. Modeling and...

The study is based on the exact analytical solution for the general conjugation problem of three-dimensional quasi-stationary field at a flat interface between dielectric and conducting media. It is determined that non-uniform electromagnetic field always decreases in depth faster than uniform...

As gas pipeline systems become larger and more complex, the importance of optimally operating and planning these facilities has increased. The capital costs and operating expenses of pipeline systems are so large that even small improvements in the use of the system can involve large sums of money. ...

Introduction. Nowadays, the accelerated development of materials and technologies and the finding of new ones is a prerequisite for the improvement of well-known electromagnetic constructions used in various devices, as well as for the development of new ones. New construction of hybrid...

Aim. This work presents the amelioration of direct power control using synergetic-super twisting algorithms for asynchronous generators integrated into dual-rotor wind turbine systems. Method. The main role of the direct power control is to control the active and reactive powers and reduce the...

Purpose. The purpose is to develop solutions for the implementation of optimal laws of arms positioning, overshoot-free and requiring no post-adjustments. Method. The control model is based on the fuzzy set theory; and the structural modeling methodology is used to study the dynamics indices....

Goal. Analysis of the effect of load inductance at the output of the class D amplifier for different values of the duration of «dead time» and assessment of the adequacy of existing mathematical models for calculating the THD at the output of the amplifier depending on the duration of «dead time»....

This paper deals with the mitigation of 110 kV double-circuit overhead line magnetic field inside five-story Khrushchev buildings. We show that the magnetic field can exceed the reference level 0.5 μT in 90 % part of living space. To mitigate the magnetic field, we propose the inverted L-shaped...

Purpose. An experimental verification of the existence of a range of values for the parameters of the capacitive energy storage of the magnetic-pulse installations with controlled vacuum discharger, in which, with a high probability, there is a «cut» of the discharge current pulses and the...

Introduction. The wave parameters of power cables with polymer insulation differ significantly from the parameters of overhead lines and power transformers. As a result, there are more and more objects in electrical networks for which the occurrence of complex multi frequency transients,...

Introduction. Three-phase inductors of a rotating magnetic field are used in grinders, separators and stirrers for the technological processing of bulk and liquid substances. This occurs in a cylindrical working chamber under the influence of ferromagnetic elements in the form of pieces of iron...

The paper defines the directions of improving turbogenerators as the basis for ensuring the energy independence of Ukraine. The analysis of the state, problems and prospects for the development of modern electric power industry. Goal of the work is to identify promising directions for sustainable...

Goal The purpose of the article is to further develop analytical methods for calculating and synthesizing power electronics systems with deep pulse width modulation (PWM). A three-circuit linear electric drive system for positioning the working body of the mechanism of onboard aircraft equipment,...

Purpose. Determination in the analytical form of the maximum limiting influence of the non-identity of the capacitive elements of the high-voltage arm on the amplitude-frequency characteristic and phase-frequency characteristic of the voltage divider with parallelseries connection of R-, C-elements ...

Introduction. Voltage sag, which is associated to a transitory drop in the root mean square voltage characterizing an electrical source network. During these perturbations, the corresponding electronic customers and devices will suffer from serious operating troubles causing dangerous damages....

The aim of the work is to study the possibility and features of the use of inertial storage devices in the traction electric drive of multi unit train with a power plant based on fuel cells. Methodology. The principle of power flow control in traction electric drives in the modes of acceleration...